| :: Home > Products > ISDB-T All-in-One RF Signal Generator - ISG300 / ISG500 |
All-in-One RF Signal Generator |
|
|
| Mobile TV Test Solution / ISDB-T |
| ISDB-T All-in-One RF Signal Generator : ISG300 / ISG500 |
 |
 |
|
|
|
|
|
|
ISG500 is the all-in-one ISDB-T signal generator with ISDB-T standards for digital terrestrial TV system used in Japan. It is the most flexible solution for design evaluation and conformance test of ISDB-T receiver such as set-top box, TV, Car navigation and mobile phone which require a live modulated RF signal. ISG500 is a complete solution for ISDB-T Signal generation with built-in ISDB-T modulators, upconverters and MPEG2 TS Generator in a portable unit. It can also support all DTV standard in one unit including DVB-T, DVB-C, ATSC, OpenCable, DVB-S/S2 and DTMB(DMB-TH). Most importantly, ISG500 supports multi signal output (Max. 3 RF) in one unit that allows simultaneous signal use. It will save your cost and time for buying several other DTV signal generators.
|
|
|
|
ISG500 is the all-in-one ISDB-T signal generator with ISDB-T standards for digital terrestrial TV system used in Japan. It is the most flexible solution for design evaluation and conformance test of ISDB-T receiver such as set-top box, TV, Car navigation and mobile phone which require a live modulated RF signal. ISG500 is a complete solution for ISDB-T Signal generation with built-in ISDB-T modulators, upconverters and MPEG2 TS Generator in a portable unit. It can also support all DTV standard in one unit including DVB-T, DVB-C, ATSC, OpenCable, DVB-S/S2 and DTMB(DMB-TH). Most importantly, ISG500 supports multi signal output (Max. 3 RF) in one unit that allows simultaneous signal use. It will save your cost and time for buying several other DTV signal generators.
|
|
|
|
General Characteristics
· Modulator : ISDB-T Layered-OFDM (Options : DVB-T, ATSC, DVB-C, OpenCable , DVB-S/S2, ISDB-T, DVB-T/H, DTMB(DMB-TH), ADTB-T) Support Brazilian ISDB-T (SBTVD)
· RF Upconverter : Multi RF System (50 ~ 870MHz, 1KHz steps), Max.2 · RF Level : -110 ~ 0dBm (0.1dB steps, -110~ +20dBm : Optional) · Easy Channel Selection by World-wide Channel Table DB · MPEG2 TS Generator : Internal Generation · MPEG2 TS Generator : External DVB-ASI/SPI Output (Optional) · TMCC Generation · 1 Seg. & 12 Seg.(HD) Full Support · Real-time A/V Decoding (MPEG2 SD/HD & H.264 QVGA/SD/HD) · Automatic Modulator setting (TMCC Base) * ISDB-T System Only · Automatic Modulator setting (NIT Base) * DVB/ISDB-T System Only · Automatic Modulator setting (PCR bitrate Base/Dynamic Mode) · Manual Modulator Setting (Parameter Setting) · Manual Bitrate Setting · TS Analysis Information · Jitter Injection (TR 101 290 Level Error) · C/N Noise Generation (AWGN) - C/N Range : 0~+45dB (Resolution : 0.1dB) - Noise BW : 0~10MHz according from Signal CH BW (Spec.) · TS Packet Size : RAW/188/204/188+16(LVDS) (ASI Option) · Inserting Null Packets (Static Mode) · Stream & System Monitoring · Play List (Sequential Play) · Memory Play on RAM Cache memory · Touch Screen & Easy Operation GUI (Patent Registered)
PRBS Pattern Test
· Pseudo random signal (PRBS-9) · Pseudo random signal (PRBS-15) · Pseudo random signal (PRBS-23)
Intended Application
· ISDB-T Test & Measurement · ISDB-T 1SEG. Receiver Development · ISDB-T 1SEG. Receiver QC · ISDB-T Chip Development · ISDB-T Station Design & Verification · ISDB-T Field Test · 1SEG. Receiver Manufacturing
|
|
|
|
Modulator Options
DVB-T Module (MM-501)
· Broadcasting system - Digital Terrestrial TV : DVB-T · Transmission Parameter - Hierarchical mode : Fully supported - Modulation : COFDM - IFFT : 2K, 8K - Guard Interval : 1/4, 1/8, 1/16, 1/32 - Modulation Modes : QPSK, 16, 64QAM - Coding Rate : 1/2, 2/3, 3/4, 5/6, 7/8
ATSC Module (MM-502)
· Broadcasting system - Digital Terrestrial TV : ATSC · Transmission Parameter - Modulation : 8VSB
DVB-C Module (DMM-503)
· Broadcasting system - Digital Cable TV : DVB-C · Transmission Parameter - Modulation : QAM (Annex - A/C) - Modulation Modes : 32, 64, 128, 256QAM
OpenCable Module (MM-504)
· Broadcasting system - Digital Cable TV : OpenCable · Transmission Parameter - Modulation : QAM (Annex - B) - Modulation Modes : 64, 256QAM
DVB-S/S2 Module (MM-505)
· Broadcasting system - Digital Satellite TV : DVB-S/S2 · Transmission Parameter - Modulation : DVB-S (QPSK) DVB-S2 (QPSK, 8PSK) - Modulation Modes : 32, 64, 128, 256QAM - Integrated L-Band Upconverter with on-board
DTMB(DMB-TH) Module (MM-506)
· Broadcasting system - Digital Terrestrial TV : DTMB(DMB-TH) · Transmission Parameter - Modulation : TDS-OFDM - Modulation Modes : 4QAM(QPSK), 16, 64QAM - Guard Interval : PN420, PN595, PN945 (Frame Header) - Coding Rate : 0.4, 0.6, 0.8 - Bandwidth : 5, 6, 7, 8 - Time Interleaver : 240, 720
ADTB-T Module (MM-509)
· Broadcasting system - Digital Terrestrial TV : ADTB-T · Transmission Parameter - Modulation Modes : 4QAM NR, 4QAM, 16QAM, 32QAM - Guard Interval : PN420, PN595, PN945 (Frame Header) - Bandwidth : 5, 6, 7, 8 - Time Interleaver : 240, 720
Function Options
GPIB Module (FM-202)
· IEEE 488.2
AWGN Module(FM-203)
· C/N range : 0 ~ +45dB · C/N resolution : 0.1 dB Steps · Noise Band Width : 0 ~ 10MHz
|
|
|
|
Modulation Specifications
* Channel coding system
Broadcasting system - Digital Terrestrial TV : ARIB STD-B31
* Transmission Parameter
· Hierarchical Layer : TV (3 layer max. ) · MODE : MODE 1, MODE 2, MODE 3 · Guard Interval : 1/4, 1/8, 1/16, 1/32 · Modulation Mode : DQPSK, QPSK, 16QAM,64QAM · · Coding Rate : 1/2, 2/3, 3/4, 5/6, 7/8 · Time Interleave length : 0 to 32(depend on broadcasting) · Partial Reception : Settable
* Number of Segments
· Mobile TV : 1 Seg. Mobile TV broadcasting · Digital TV : 13 Seg. Digital TV broadcasting
RF Specifications
· Output Connector : N type - RF Output Frequency : 50~870 MHz (VHF/UHF) * DVB-S/S2 RF Output Frequency: 950 ~ 2150MHz - Frequency Resolution : 1Hz - Bandwidth : 6/7/8 MHz (7/8 MHz ? Future Support) - Frequency Accuracy : 3 x 10-6 / 25 ℃ - RF Output Level :-110 ~ 0dBm - RF Level Resolution :0.1dB steps - RF Level Accuracy :±0.5dB relative to the level at 18-33 ℃ - RF Impedance : 50 Ω
Operating Specifications
· Power supply : AC 100 ~ 240V, 50/60Hz · Power consumption : Less than 400W · Operating temperature : 10 to 40 ℃ · Operating humidity : 20 ~ 85% RH (No Condensation) · Guaranteed temperature : 15 to 35 ℃ · Guaranteed humidity : 20 ~ 85% RH (No Condensation) · Storage temperature : -40 to +70 ℃ / 20 ~ 85% RH · Operating environment : Indoor · Operating attitude : Around 2000m · Over-voltage category : II · Pollution degree : 2 · Dimensions : 435(W) x 231.8(H) x 519.7(D) mm · Weight : Approx. 17kg (without options)
OS system
· Embedded OS
User interface system
· 10.4 inch TFT color LCD (1024 x 768) · Touch Screen
External Interface system
· USB Interface : USB HDD, USB Stick · Remote Control : RS-232C, GPIB (Optional)
|
|
|